Car Park Barriers and Bollards in Gosport
Control town, waterfront and workshop entrances on a peninsula with water on three sides.
Automated Openings supplies and installs automatic barriers and bollards across the Gosport peninsula, including the town, Forton and Brockhurst, the waterfront, and sites towards Lee-on-the-Solent. We also maintain and repair equipment, including systems fitted by other companies.
Book a free site surveyBarriers for a marine town and its workshops
Gosport's working entrances sit on a tight peninsula: town and waterfront parking, marine and workshop yards along roads such as Mumby Road, and commercial sites towards Daedalus and Lee-on-the-Solent. Space is limited, salt air is hard on metalwork, and a barrier is often a more practical daily control than a gate that has to open fully every time a vehicle passes.
It lifts for authorised drivers and stays down for the rest, and can be paired with a second barrier for a separate exit. This page is for Gosport. For the service in general, see our main barriers and bollards page. We travel from our base in Southampton — see also car park barriers in Southampton.
Town parking, marine yards and local car parks
We supply and install barriers to suit a tight approach, whether that is a town car park, a workshop yard or a residents' parking area in Alverstoke or Lee-on-the-Solent.
Civic, ferry-side and town car parks
At a town or waterfront car park, an automatic barrier keeps casual parking out and lets permitted drivers in from a keypad, fob, remote, intercom or GSM. The survey pays attention to tight streets and how pedestrians move around the entrance.
Marine, workshop and depot entrances
Workshop and marine yards need an entrance that can take working traffic and still be closed down at night. Barriers manage the day; commercial and industrial gates can secure the opening out of hours.
Apartments, Lee-on-the-Solent and Alverstoke
Apartment car parks and private roads on the peninsula often need a clearly controlled entrance, rather than a gate that has to swing fully open on a narrow frontage.
Protect slipways, pavements and reserved bays
On a peninsula, bollards are often used to keep vehicles off pavements, slipway approaches, reserved bays and the edges of waterfront buildings. Some rise or retract when access is needed; others stay as a fixed stop. Because salt air is hard on metalwork, the survey also looks at how exposed the site is. We recommend the type after looking at the ground, the approach and how the space is used.
Let the right vehicles in, even on a narrow approach
Barriers can be operated by keypads, fobs, remote controls, intercoms or GSM systems. If you already have automated gates on the same site, we can help you choose controls that work together.
Waterfront, workshops and shift traffic
Working yards and town parking can be busy at the start and end of the day, with little room to queue. The survey looks at waiting space, sightlines and where the controls should sit so a driver can use them without blocking the road.
Flats, schools and local healthcare sites
Apartment, school and healthcare car parks in Gosport, Alverstoke and Lee-on-the-Solent need a clear way for residents, staff or authorised visitors to get in. Managing agents can start with our landlords and managing agents page.
Supply, installation and safety
01 / Survey
On the peninsula we check how narrow the approach is, where a power supply can be taken from, and how much salt spray the equipment would sit in, so the barrier or bollard is positioned safely.
02 / Specify and install
We recommend equipment to suit the entrance and how often it will be used, then supply and install it and set up the access controls.
03 / Safety checks
Barriers and automatic bollards are powered machines that move where people and vehicles are. We carry out safety checks, including force testing where it applies, before handover.
04 / Servicing
They should be serviced at least every six months, and more often on busy or exposed coastal sites, where salt air is hard on metalwork. We can include them in a maintenance contract alongside your gates.
We're a Gate Safe Aware Installer — see our accreditations. After installation we explain how the system works and leave you with the operating and maintenance information.
Maintenance, repairs and health checks
A barrier on a Gosport waterfront yard or a town car park has to cope with daily use and with the sea air. We maintain and repair car park barriers, vehicle barriers and bollards, including ones supplied by other companies, and we can include them in a maintenance contract alongside your gates. If something has already gone wrong, we also repair barriers.
If you want to know whether an existing barrier or bollard is working safely, our gate health check covers barriers and bollards too. It costs £199 for one barrier or bollard, plus £99 for each additional one checked on the same visit, and you get paperwork and a written report afterwards.
Before you specify a barrier or bollard
Do you install car park barriers in Gosport?
Yes. We supply and install automatic car park barriers and bollards across the Gosport peninsula, including the town, the waterfront, Forton, Brockhurst and sites towards Lee-on-the-Solent. We start with a free site survey and a quotation for the agreed work.
Can a barrier be opened with a keypad, fob or intercom?
Yes. Barriers can be operated by keypads, fobs, remote controls, intercoms or GSM systems, so you decide who gets in and when. If you already have automated gates, we can help you choose controls that work across the site.
Do you repair barriers installed by another company?
Yes. We maintain and repair car park barriers, vehicle barriers and bollards, including ones supplied by other companies. We can also include them in a maintenance contract alongside your gates.
Does the gate health check cover barriers and bollards?
Yes. Our gate health check covers barriers and bollards as well as gates. It costs £199 for one barrier or bollard, plus £99 for each additional one checked on the same visit, and you get paperwork and a written report afterwards.
How often should a car park barrier be serviced?
Barriers and automatic bollards should be serviced at least every six months, and more often on busy or exposed coastal sites. They are powered machines that move where people and vehicles are, so they need regular checks.
What is the difference between a barrier and a bollard?
A barrier controls vehicles at a car park or yard entrance and lifts to let authorised drivers through. Bollards are posts that stop vehicles going where they shouldn't — useful in Gosport for protecting pavements, slipway approaches and reserved bays. Some are automatic and rise or retract; we recommend the right arrangement after the survey.
Can you install a barrier at an apartment, school or healthcare car park?
Yes. We supply and install barriers and bollards for apartment and managed car parks — see our page for landlords and managing agents — as well as schools and healthcare sites, in addition to town parking and workshop yards. The survey looks at how drivers and pedestrians use the entrance, and who needs access.
Do you cover Lee-on-the-Solent, Alverstoke and the waterfront?
Yes. We cover the whole peninsula, including Lee-on-the-Solent, Alverstoke and waterfront yards. If you also need gates to secure a yard out of hours, see our commercial and industrial gates page. We can look at both on the same visit.
Tell us about your site
Let us know how tight the approach is, how many vehicles use the entrance and who needs access, and we'll recommend suitable barriers or bollards. We offer a free site survey and a quotation for new installations.
Book a free site survey