Landlords, managing agents and housing associations
Electric gates for landlords and managing agents
If you look after flats, a gated development or a shared car park, the electric gates, barriers and bollards on site need to be kept safe. We help landlords, managing agents, residents' management companies and housing associations across Hampshire, Dorset and the M3 corridor do that — with force-tested safety checks, a written report after every visit, and a maintenance plan that fits the site.
Duty of care
Keeping shared gates safe is a duty of care
An automated gate is a machine. If it is not designed, installed and maintained properly, it can seriously injure someone who uses it or walks past it.
The Health and Safety Executive is clear about who is responsible. Landlords, and those responsible for powered gates as part of a work activity (for example managing agents), have duties under section 3 of the Health and Safety at Work etc Act 1974 for the safety of people they do not employ, including residents and the public. HSE also says that where premises are managed by a business or organisation — including landlords and managing agents of residential complexes — that general duty for safety applies. If the gates form part of a workplace, which can include associated car parks and private roads, the Workplace (Health, Safety and Welfare) Regulations 1992 also apply, particularly the duties to maintain the equipment and keep it safe.
HSE expects landlords and agents to maintain similar standards of safety for construction, inspection and maintenance as employers have under those workplace rules. If a competent contractor tells you the equipment is unsafe, prompt action should be taken.
The UK charity Gate Safe, which campaigns for safer automated gates, says housing associations have a duty of care to keep the automated gates in their portfolio legally compliant, and to have them regularly maintained by a suitably trained and competent person. Gate Safe also recommends that the people looking after the site carry out their own routine visual checks between professional visits.
The Property Institute's public note on powered gates (B12) adds a practical point for managing agents: under the same 1974 Act, businesses must protect people affected by their activities so far as reasonably practicable, and an agent's legal duties can depend on the management agreement. It is worth being clear, in writing, who is responsible for the gates.
This is a summary of published guidance, not legal advice. If you need advice on your own duties, speak to your solicitor or health and safety adviser.
Guidance we have drawn on:
- HSE: legal responsibilities for powered gates
- HSE: the basics, including duties for landlords and managing agents
- HSE: ensuring powered doors and gates are safe
- Gate Safe: housing associations' duty of care
- Gate Safe: force testing and why a pass is not the whole picture
- Door & Hardware Federation: the need for force testing
- The Property Institute, B12: Powered Gates (public synopsis)
Planned maintenance
What a planned setup looks like
The aim is a quiet, predictable routine, so you are not waiting for a gate to fail on a Sunday evening or discovering a safety fault only after a complaint.
See the site first
We start with a health check or a free site survey, including gates we did not install. You get a clear picture of the equipment, how it is used, and what it needs.
A schedule that fits
We recommend a professional visit at least every six months. Busy entrances may need seeing more often. Contracts are quoted per site, with visits every six months or once a year — there are no standard package prices.
The same checks, every time
Each visit includes inspection, force testing, access-control checks and a written report. If something needs repairing, we quote for it and you decide what happens next.
You can read more about how contracts work on our maintenance and service contracts page. We are a Gate Safe Aware Installer, and we force test every gate we install, service or safety-check.
On every visit
Safety checks, access and emergency features
Shared entrances work hard. Residents, visitors, deliveries and sometimes emergency services all use the same gates, barriers or bollards. This is what we look at each time we visit.
Force testing
We use a force tester to measure how hard the gate presses if something is in its way, and check those readings are at a safe level. We do this on every service and health check, not only at handover.
Safety devices
We test photocells and safety edges, look for damage, wear or poor alignment, and check that the gate stops or reverses when it should. A device that has been knocked out of line can leave the entrance looking normal while it is no longer safe.
Resident access
We check remotes, fobs, keypads, intercoms and GSM units, and can help you manage resident access when someone moves in or out, or when a code or handset needs changing. If a keypad or intercom fails, send us photos or a short video on WhatsApp to 07890 387915.
HSE and the Door & Hardware Federation both stress that where force limitation is the main means of safety, the forces should be verified by testing. Gate Safe also points out that passing a force test alone does not mean a gate is safe — the construction, safety devices and how the gate is set up all matter too.
Emergency access. On a shared entrance, people still need to get in and out if the power fails, and the fire service may need a reliable way in. We can specify, fit and check features such as a fire alarm link, battery backup and a drop key switch on gates, barriers and bollards, and we include these in our checks where they are already installed.
Paperwork
A written report after every check
After every health check or service visit you get paperwork confirming the work was carried out, together with a written report. That record is there to show the check was done.
The report covers two things:
- any defects, or parts that need work to bring the gate, barrier or bollard up to the legal standard
- parts that are wearing and are likely to need replacing soon, so you can plan and budget for them rather than facing everything at once
If anything needs repairing, we will quote for it. You decide what happens next.
Health check
£199 for one gate
£99 for each additional gate checked on the same visit. A pair of double gates counts as one. Barriers and bollards can be checked on the same visit.
You get force testing and a written report. A site survey is free for all gates.
Hampshire, Dorset and the M3 corridor
Where we work
Automated Openings is based in Nursling, Southampton. We look after shared electric gates, barriers and bollards for landlords, managing agents and housing associations across the areas we cover.
- Southampton
- Hampshire
- Winchester
- Portsmouth
- Bournemouth
- Poole
- Christchurch
- Salisbury
- Along the M3 corridor
Questions
Frequently asked questions
Who is responsible for the safety of communal electric gates?
The Health and Safety Executive says landlords, and those responsible for powered gates as part of a work activity (for example managing agents), have duties under section 3 of the Health and Safety at Work etc Act 1974 for the safety of people they do not employ, including residents and the public. If the gates form part of a workplace, which can include associated car parks and private roads, the Workplace (Health, Safety and Welfare) Regulations 1992 also apply. A managing agent's exact duties can depend on the management agreement. This is a summary of published guidance, not legal advice.
How often should shared electric gates be serviced?
We recommend a professional service at least every six months. Gates and barriers that are used heavily may need visiting more often. Gate Safe also recommends routine visual checks by the people looking after the site between professional visits.
What does a gate health check cost?
A safety systems and gate health check costs £199 for one existing gate, plus £99 for each additional gate checked on the same visit. A pair of double gates counts as one. The same check can be carried out on barriers and bollards.
What do we get after a check or service visit?
You get paperwork confirming the check or service was carried out, together with a written report. The report covers defects or parts that need work to bring the gate up to the legal standard, and parts that are wearing and are likely to need replacing soon, so you can plan and budget for them. If anything needs repairing, we will quote for it. You decide what happens next.
Do you look after gates, barriers and bollards you did not install?
Yes. We maintain and repair systems fitted by other companies as well as our own. A health check or a first inspection is a good way to see what condition the equipment is in before agreeing a maintenance schedule.
Do you offer standard maintenance contract prices?
No. There are no standard packages. Each maintenance contract is tailored and quoted for the site, covering gates, barriers, bollards or a mix, with visits every six months or once a year. We will recommend a schedule once we have seen the equipment and how it is used.
What should I do if a keypad, fob or intercom fails?
Send us photos or a short video on WhatsApp to 07890 387915. We check keypads, remotes, fobs, intercoms and GSM units as part of every health check and service visit, and we can help you manage resident access.
Which areas do you cover?
We are based in Nursling, Southampton, and we work across Hampshire, Dorset including Bournemouth and Poole, the Salisbury area, and along the M3 corridor. A site survey is free for all gates.
Tell us about the site
Let us know where the gates, barriers or bollards are and how they are used, and we will arrange a free site survey or a health check. If something has already failed, send photos or a short video on WhatsApp to 07890 387915.