Car Park Barriers and Bollards in Poole and Christchurch
Control port, industrial and town entrances either side of the two harbours.
Automated Openings supplies and installs automatic barriers and bollards in Poole and Christchurch, including sites around Poole Port and Holes Bay, the Nuffield and Sopers Lane industrial area, and town and retail parking in Christchurch and Somerford. We also maintain and repair equipment, including systems fitted by other companies.
Book a free site surveyBarriers for harbour towns with working estates
Poole and Christchurch run together along the Dorset coast, but their working entrances are quite distinct: port and industrial traffic around Holes Bay, Fleetsbridge and the Nuffield estate, and town, retail and trading-estate parking in Christchurch, Somerford and around Hurn. For Bournemouth itself, see our page for barriers in Bournemouth.
An automatic barrier lifts for authorised vehicles and stays down for the rest, and can be paired with a second barrier for a separate exit. This page is for Poole and Christchurch. For the service in general, see our main barriers and bollards page.
Port, industrial and town car parks
We supply and install barriers to suit the entrance, whether that is a working yard by the harbour, a trading unit, or a town or apartment car park.
Poole Port, Holes Bay and Hamworthy
Around the port and harbour-side yards, a barrier keeps casual traffic out and lets permitted drivers through from a keypad, fob, remote, intercom or GSM. The survey takes account of larger vehicles and how tightly the approach sits next to working quays and roads.
Nuffield, Sopers Lane, Somerford and Hurn
Industrial and trading estates on both sides of the two towns need an entrance that can take working traffic and still be closed down at night. Barriers manage the day; commercial and industrial gates can secure the yard out of hours.
Poole, Christchurch and apartment parking
Town, retail and apartment car parks in Poole, Parkstone, Christchurch and the coastal edge often need a clearly controlled entrance, rather than a gate that has to open fully every time a car passes.
Protect quaysides, walkways and reserved parking
Around the harbours and on industrial estates, bollards protect pedestrian routes, loading edges, equipment and reserved bays, and can hold an access route clear. Some are automatic and rise or retract when access is needed; others stay as a fixed stop. Coastal sites need particular care, because salt air is hard on metalwork. We recommend the type after looking at the ground, the approach and how the space is used.
Working traffic and residents on neighbouring sites
Barriers can be operated by keypads, fobs, remote controls, intercoms or GSM systems. If you already have automated gates on the same site, we can help you choose controls that work together.
Port, industrial and trading estates
Staff, hauliers and contractors often share one entrance, with peaks at shift changes and delivery slots. The survey looks at waiting space, turning room and where the controls should sit so drivers can use them safely.
Town, apartment and healthcare parking
Apartment, school and healthcare car parks in Poole and Christchurch need a clear way for residents, staff or authorised visitors to get in. Managing agents can start with our landlords and managing agents page.
Supply, installation and safety
01 / Survey
We check the width of the road and turning room for larger vehicles, where power can come from, and how close the site is to the harbour, so the barrier or bollard is correctly placed.
02 / Specify and install
We recommend equipment to suit the entrance and how often it will be used, then supply and install it and set up the access controls.
03 / Safety checks
Barriers and automatic bollards are powered machines that move where people and vehicles are. We carry out safety checks, including force testing where it applies, before handover.
04 / Servicing
They should be serviced at least every six months, and more often on busy industrial or harbour-side sites, where salt air is hard on metalwork. We can include them in a maintenance contract alongside your gates.
We're a Gate Safe Aware Installer — see our accreditations. After installation we explain how the system works and leave you with the operating and maintenance information.
Maintenance, repairs and health checks
A barrier on a Nuffield unit or a Christchurch town car park still needs regular checks, and harbour-side sites especially so. We maintain and repair car park barriers, vehicle barriers and bollards, including ones supplied by other companies, and we can include them in a maintenance contract alongside your gates. If something has already gone wrong, we also repair barriers.
If you want to know whether an existing barrier or bollard is working safely, our gate health check covers barriers and bollards too. It costs £199 for one barrier or bollard, plus £99 for each additional one checked on the same visit, and you get paperwork and a written report afterwards.
Before you specify a barrier or bollard
Do you install car park barriers in Poole and Christchurch?
Yes. We supply and install automatic car park barriers and bollards across Poole and Christchurch, including sites around the port, the Nuffield and Sopers Lane area, Somerford, Hurn and town and apartment car parks. For Bournemouth, see barriers in Bournemouth. We start with a free site survey and a quotation for the agreed work.
Can a barrier be opened with a keypad, fob or intercom?
Yes. Barriers can be operated by keypads, fobs, remote controls, intercoms or GSM systems, so you decide who gets in and when. If you already have automated gates, we can help you choose controls that work across the site.
Do you repair barriers installed by another company?
Yes. We maintain and repair car park barriers, vehicle barriers and bollards, including ones supplied by other companies. We can also include them in a maintenance contract alongside your gates.
Does the gate health check cover barriers and bollards?
Yes. Our gate health check covers barriers and bollards as well as gates. It costs £199 for one barrier or bollard, plus £99 for each additional one checked on the same visit, and you get paperwork and a written report afterwards.
How often should a car park barrier be serviced?
Barriers and automatic bollards should be serviced at least every six months, and more often on busy or harbour-side sites. They are powered machines that move where people and vehicles are, so they need regular checks.
What is the difference between a barrier and a bollard?
A barrier controls vehicles at a car park or site entrance and lifts to let authorised drivers through. Bollards are posts that stop vehicles going where they shouldn't — useful around harbours and estates for protecting walkways, loading edges and reserved bays. Some are automatic and rise or retract; we recommend the right arrangement after the survey.
Can you install a barrier at an apartment, school or healthcare car park?
Yes. We supply and install barriers and bollards for apartment and managed car parks — see our page for landlords and managing agents — as well as schools and healthcare sites, in addition to port, industrial and town car parks. The survey looks at how drivers and pedestrians use the entrance, and who needs access.
Do you cover Hamworthy, Parkstone, Somerford and Hurn?
Yes. We cover both towns and the industrial and coastal areas around them, including Hamworthy, Parkstone, Somerford and Hurn. If you also need gates to secure a yard out of hours, see our commercial and industrial gates page. We can look at both on the same visit.
Tell us about your site
Let us know whether the entrance is a port or industrial yard, a town car park or residents' parking, how large the vehicles are and who needs access, and we'll recommend suitable barriers or bollards. We offer a free site survey and a quotation for new installations.
Book a free site survey