Existing swing and sliding gates

Automate your existing gates

If you already have manual swing or sliding gates, you may not need a new pair. When the gates, posts and hinges are sound, we can often add motors, safety devices and access control, and leave the gates you like in place. We are based in Nursling, Southampton, and we do this work for homes — and some business entrances — across Hampshire, Dorset and the M3 corridor. A site survey is free for all gates, and we will tell you honestly if they are not suitable.

Suitability

What makes a gate suitable

An automated gate is moved by a motor, day in, day out, so the structure has to be up to the job. At a free site survey we look at the gates you already have, not just the opening.

Sound, square and moving freely

The gates should be solid, reasonably square and move freely by hand. Rotten timber, warped leaves or a gate that drags or sags will strain a motor and is usually a sign that automation is not the right next step.

Strong posts and hinges

The posts or piers, and the hinges, have to carry both the gate and the motor. Worn, loose or undersized hinges, and weak or leaning posts, are a common reason a retrofit is not sensible. Brick piers sometimes need reinforcing.

Weight and construction

The motor has to match the size and weight of the gate. Heavy hardwood or steel is fine if the structure is strong enough. Lighter or flexible timber often is not, because it can twist and will not close consistently.

Ground and slope

We look at the ground around the posts, any track for a sliding gate, and whether a slope would stop a swing gate opening fully. An inward-opening gate on a rising drive can hit the ground before it is open.

Room for the motors

Arm or ram motors need space on the posts or piers. Underground motors sit in a box below the hinge and need drainage. A sliding gate needs room beside the opening for the motor and for the gate to run.

An honest survey

We will tell you if they are not suitable

Putting motors on gates that are rotten, warped, too heavy for their posts or hung on weak hinges is a false economy. If we do not think your gates will make a safe, reliable automatic entrance, we will say so, and we will explain why.

If new gates would be the better investment, we can design and manufacture a pair that fits the opening, with the right hinge positions, motor mounting points and safety gaps built in from the start. That decision is yours. Many gates we see are perfectly suitable, and automation is then usually the simpler, less disruptive option.

Send photos of the gates, posts and hinges by WhatsApp to 07890 387915 if you would like us to take a first look before the survey. A photograph is not a substitute for a visit, but it helps us plan.

Motors and power

The options, once the gates are suitable

The right motor depends on whether you have swing or sliding gates, how heavy they are, how often they will be used, and how much of the mechanism you want to see.

Swing gates: ram, arm or underground

Above-ground ram or arm motors fix to the gate and the post or pier. They are straightforward to reach for servicing and suit a wide range of gates. Underground motors sit in a box beneath the hinge, out of sight, which some properties prefer, but they need good drainage — standing water is a common cause of faults. Double gates need one motor per leaf. There is more on swing gate automation.

Sliding gates: a rack and motor

A sliding gate is driven along a rack, with the motor beside the opening. It suits short, sloping or narrow driveways where there is no room to swing, and it needs a clear run and a sound track or foundation. If mud or stones would clog a track, a cantilever sliding gate, with no ground track across the opening, can be a better design — though that is usually a new gate, not a conversion.

Power: mains or solar

A mains supply to the gate is the usual route. If the house is a long way from the entrance, trenching and cable runs can be a large part of the job. Where there is no mains nearby, a solar panel and battery can run the gate without a long trench across a drive or field. We will check the light, and the cable route, at the survey. We already fit solar off-grid gates, including on rural entrances around Southampton and the New Forest.

Trusted motor brands

We work with established brands such as BFT, CAME, FAAC, Nice and Beninca, and recommend the motor that suits the gate rather than a particular badge. You can read more about the brands we service on our motor suppliers page.

Safety and paperwork

Safety devices, force testing and your handover pack

An automatic gate is a heavy machine that moves by itself, so it must be safe for your family, visitors, deliveries and pets. Every retrofit we do includes suitable safety devices, and we force test the gate before we hand it over. We are a Gate Safe Aware Installer.

Photocells and safety edges

Photocells are non-contact sensors that stop or reverse the gate when something breaks the beam. Safety edges are contact devices that stop or reverse the gate if they touch something. Most gates use both, because they protect different zones. Be wary of any quote that leaves them out. There is a short guide to safety edges.

Force testing on every install

A force tester measures how hard the gate pushes when it meets an obstruction, so we can check the readings are at a safe level. We do this on every installation before handover, and we repeat it on every service and safety check.

Your handover pack

When we hand the gates over, we show you how everything works, including how to open them by hand if the power fails. You also receive:

  • an electrical certificate, where we carried out the electrical work
  • an operation and maintenance (O&M) manual, covering how to use, maintain and clean the gate
  • the force-testing readings taken at commissioning
  • a settings book kept in the control panel, so any future engineer can see how the gate is set up

Getting in and out

Access control

How you open the gate is part of the design, not an afterthought. The usual options are:

  • remote handsets for the people who use the entrance every day
  • keypads for visitors or deliveries
  • video or audio intercoms, so you can speak to a caller before letting them in
  • GSM intercoms, and on some systems a phone app, so you can open the gate from your phone

See gate intercoms and access control for how these work in more detail. We will recommend a simple setup that matches how you actually use the entrance.

Afterwards

Servicing and looking after the gates

Once the gates are automated, they should be professionally serviced at least every six months, so the motors, hinges, track and safety devices stay in good order. Busier entrances may need seeing more often.

Our maintenance contracts are tailored and quoted for the site. There are no standard package prices. Each visit includes force testing and a written report.

Guide figures, not a quote

What independent guides say about cost

We do not publish our own installation prices, because two entrances on the same road can need very different motors, cable runs and groundwork. Independent UK guides give a useful starting point if the gates you already have are suitable.

Less (updated 13 November 2026) gives a guide of about £1,500 to £3,000 fitted for existing swing gates, or £2,000 to £4,000 for an existing sliding gate. Costwise puts many retrofit jobs at £1,500 to £3,000 fitted.

Those are guide figures, not a quotation. A long cable run, difficult ground, weak posts that need work, or a video intercom can take a job outside those ranges. The only reliable price comes from a visit to your entrance, and our site survey is free for all gates. There is more context in our electric gate cost guide.

Cost figures drawn from:

Hampshire, Dorset and the M3 corridor

Where we work

Automated Openings is based in Nursling, Southampton. We automate suitable existing gates for homes, and for some business and farm entrances, across the areas we cover. For heavier commercial or industrial sites, see our commercial and industrial gates page.

  • Southampton
  • Hampshire
  • Winchester
  • Portsmouth
  • Bournemouth
  • Poole
  • Christchurch
  • Salisbury
  • Along the M3 corridor

Questions

Frequently asked questions

Can you automate my existing gates?

Often, yes, if the gates are sound and square, move freely, and are hung on strong posts and hinges that can take a motor. We check this at a free site survey and will tell you honestly if they are not suitable.

What do you look at on the survey?

The gates themselves, the posts or piers, the hinges, the weight and construction, the ground and any slope, the space for motors, and how power can be run — or whether a solar kit would suit. Photos sent by WhatsApp to 07890 387915 help us plan the visit, but they are not a substitute for seeing the entrance.

What if my gates are not suitable?

We will explain why, and we will not recommend putting motors on gates that will not make a safe, reliable entrance. If new gates would be the better investment, we can design and manufacture a pair built for automation from the start. That decision is yours.

Is it cheaper than replacing the gates?

Often, if the gates, posts and hinges are in good condition. Independent guides put many retrofit jobs at around £1,500 to £3,000 fitted for swing gates, or £2,000 to £4,000 for a sliding gate. Those are guide figures, not a quote from us. A free site survey is the way to get an accurate price.

Do I need a mains power supply at the gate?

A mains supply is the usual route, but it is not the only one. If the house is a long way from the entrance, trenching and cable runs can add work. Where there is no mains nearby, a solar panel and battery can run the gate. We will check this at the survey.

Will the automated gates be safe?

We fit suitable safety devices, usually both photocells and safety edges, and we force test every installation before handover. We repeat force testing on every service and safety check. We are a Gate Safe Aware Installer.

What do I get at handover?

We show you how everything works, including how to open the gates by hand if the power fails. You also receive a handover pack: an electrical certificate where we carried out the electrical work, an operation and maintenance manual, the force-testing readings, and a settings book kept in the control panel.

How often should the gates be serviced afterwards?

At least every six months. Busier entrances may need visiting more often. Maintenance contracts are tailored and quoted for the site, and each visit includes force testing and a written report.

Which areas do you cover?

We are based in Nursling, Southampton, and we work across Hampshire, Dorset including Bournemouth and Poole, the Salisbury area, and along the M3 corridor. A site survey is free for all gates.

Tell us about your gates

If you would like to know whether the gates you already have can be automated, book a free site survey. Photos of the gates, posts and hinges sent by WhatsApp to 07890 387915 help us plan the visit.